NSN 5306-00-286-1962 · NIIN 002861962 · FSC 5306
NO DASHES 5306002861962
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.787 AND INCHES MAXIMUM 0.837 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| BQDM | HOLE TYPE | DRILLED |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416, TY 2, CL 3 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.060 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.315 |
| ASXK | HOLE QUANTITY | 4 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.985 AND INCHES MAXIMUM 2.015 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.438 |
Supersedes
This item replaces cancelled NIIN 002825213. An older drawing citing one of those numbers resolves here.