NSN 5306-00-639-2951 · NIIN 006392951 · FSC 5306
NO DASHES 5306006392951
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.378 |
| ASXK | HOLE QUANTITY | 4 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.787 AND INCHES MAXIMUM 0.837 |
| BQDM | HOLE TYPE | DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.765 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.500 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 008037664. An older drawing citing one of those numbers resolves here.