NSN 5315-00-080-0485 · NIIN 000800485 · FSC 5315
NO DASHES 5315000800485
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S 6300 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6050 |
| STYL | STYLE DESIGNATOR | |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.066 AND INCHES MAXIMUM 0.086 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.088 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.5 AND ROCKWELL C MAXIMUM 32.0 |
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| AASK | HEAD STYLE | |
| AAZP | CHAMFER LENGTH | INCHES MAXIMUM 0.062 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.184 AND INCHES MAXIMUM 0.186 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 1.522 AND INCHES MAXIMUM 1.542 |
| HGTH | HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.062 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.328 |
| FEAT | SPECIAL FEATURES | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
| CQSX | SHEAR STRENGTH | DOUBLE POUND 4140 |