NSN 4730-00-277-5040 · NIIN 002775040 · FSC 4730
NO DASHES 4730002775040
In Stock
TEE,PIPE TO TUBE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | THIRD END UNIFIED NATIONAL JOINT FINE (UNJF) |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL PIPE |
| AWLS | CONNECTION TYPE | THIRD END THREADED EXTERNAL TUBE |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.875 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.500 |
| CQJX | NOMINAL THREAD SIZE | THIRD END INCHES 0.875 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S20826 |
| MATT | MATERIAL | OVERALL STEEL COMP 1137 OR STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 1141 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END NPT |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | FIRST END INCHES 0.625 |
| AAJD | THREAD CLASS | 3A |
| AHNC | CONNECTION STYLE | |
| AHSJ | LEG LENGTH | FIRST END INCHES MINIMUM 1.422 AND INCHES MAXIMUM 1.469 |
| AHSJ | LEG LENGTH | SECOND END INCHES MINIMUM 1.438 AND INCHES MAXIMUM 1.485 |
| AHSJ | LEG LENGTH | THIRD END INCHES MINIMUM 1.422 AND INCHES MAXIMUM 1.469 |
| CQRB | SEAT ANGLE | THIRD END DEGREES 37.0 |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | THIRD END INCHES 0.625 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
Supersedes
This item replaces cancelled NIIN 004006659. An older drawing citing one of those numbers resolves here.