NSN 5306-01-313-9204 · NIIN 013139204 · FSC 5306
NO DASHES 5306013139204
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.053 AND INCHES MAXIMUM 1.103 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.438 AND INCHES MAXIMUM 3.468 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.610 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.384 AND INCHES MAXIMUM 1.394 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.118 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7490 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.797 AND INCHES MAXIMUM 0.812 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.365 AND INCHES MAXIMUM 2.385 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 010380361. An older drawing citing one of those numbers resolves here.