NSN 3110-00-232-3177 · NIIN 002323177 · FSC 3110
NO DASHES 3110002323177
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3290 AND INCHES MAXIMUM 2.3590 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.0940 AND INCHES MAXIMUM 1.1560 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.8650 AND INCHES MAXIMUM 1.8850 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S3652 OR ASSN STD SINGLE MATERIAL RESPONSE A-S3666 |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9480 |
| AAZF | SHANK STYLE | |
| AGYJ | SEAL QUANTITY | 2 |
| AAJD | THREAD CLASS | 3A |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGYW | BEARING SEAL TYPE | CONTACT |