NSN 3110-00-434-4653 · NIIN 004344653 · FSC 3110
NO DASHES 3110004344653
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHAFT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| AGXK | SHANK BORE DEPTH | INCHES MINIMUM 0.8440 AND INCHES MAXIMUM 0.9060 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.3650 AND INCHES MAXIMUM 1.3850 |
| AGXJ | SHANK BORE DIAMETER | INCHES MINIMUM 0.2620 AND INCHES MAXIMUM 0.2820 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3180 AND INCHES MAXIMUM 0.3380 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7555 AND INCHES MAXIMUM 1.7755 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| AAZF | SHANK STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| STYL | STYLE DESIGNATOR | |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4300 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3652 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 3666 |
| MATT | MATERIAL | SHAFT STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |