NSN 3120-01-213-0855 · NIIN 012130855 · FSC 3120
NO DASHES 3120012130855
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.9185 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.3270 AND INCHES MAXIMUM 1.3470 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.2400 AND INCHES MAXIMUM 2.2600 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5100 AND INCHES MAXIMUM 0.5200 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6250 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.2500 |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | INCHES NOMINAL 0.5620 |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | INCHES MINIMUM 0.7400 AND INCHES MAXIMUM 0.7520 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 19500 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC ALL TREATMENT RESPONSES QQ--416,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIINs 015128557 · 010102500. An older drawing citing one of those numbers resolves here.