NSN 5306-01-277-9904 · NIIN 012779904 · FSC 5306
NO DASHES 5306012779904
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.899 AND INCHES MAXIMUM 0.939 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.034 AND INCHES MAXIMUM 3.054 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.628 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.115 AND INCHES MAXIMUM 2.135 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | CHAMFER ON THREADED END AT 60.0 DEG ANGLE |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 000744463. An older drawing citing one of those numbers resolves here.