NSN 5306-00-901-4300 · NIIN 009014300 · FSC 5306
NO DASHES 5306009014300
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.899 AND INCHES MAXIMUM 0.939 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.659 AND INCHES MAXIMUM 2.679 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.760 |
| AAJD | THREAD CLASS | 3A |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| AASK | HEAD STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 OR STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-8503 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.150 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.618 |