NSN 5306-01-680-9631 · NIIN 016809631 · FSC 5306
NO DASHES 5306016809631
In Stock
BOLT,SHEAR
Bolts
Application: F-35 AIRCRAFT
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.875 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.740 AND INCHES MAXIMUM 1.760 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12 POINT, 180 KSI FTU |
| BQDM | HOLE TYPE | DRILLED |
| AGAV | END ITEM IDENTIFICATION | F-35 AIRCRAFT |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.244 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2, CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.004 AND INCHES MAXIMUM 3.024 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.808 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.940 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.428 AND INCHES MAXIMUM 1.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.198 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| ASXK | HOLE QUANTITY | 4 |
| MATT | MATERIAL | OVERALL STEEL COMP 414 OR STEEL COMP E4340 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |