NSN 5306-01-335-2905 · NIIN 013352905 · FSC 5306
NO DASHES 5306013352905
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: PACER DAWN
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.180 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.361 AND INCHES MAXIMUM 4.391 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.610 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 1.389 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.118 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7490 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.797 AND INCHES MAXIMUM 0.812 |
| AGAV | END ITEM IDENTIFICATION | PACER DAWN |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.7500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.178 AND INCHES MAXIMUM 3.198 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | HOLE DRILLED IN TOP CENTER OF HEAD,0.540/0.580 IN. DIA X 0.146 IN. NOMDEEP |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TYE II,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |