NSN 5306-01-281-7810 · NIIN 012817810 · FSC 5306
NO DASHES 5306012817810
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.579 AND INCHES MAXIMUM 0.629 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.651 AND INCHES MAXIMUM 1.681 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.585 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.055 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.383 AND INCHES MAXIMUM 0.389 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.072 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |