NSN 5920-00-685-9892 · NIIN 006859892 · FSC 5920
NO DASHES 5920006859892
In Stock
FUSEHOLDER,BLOCK
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | CONTACT COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.094 AND INCHES MAXIMUM 3.156 |
| AAQL | BODY STYLE | |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.938 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.188 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.210 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ACYB | BASE THICKNESS | INCHES MINIMUM 0.268 AND INCHES MAXIMUM 0.312 |
| SFTT | SURFACE TREATMENT | TERMINAL CADMIUM AND CADMIUM AND CHROMATE AND CADMIUM AND PHOSPHATE |
| MATT | MATERIAL | BODY PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSDX | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | POLE, MAINLINE, FUSED 2 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 4 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 0.328 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-C-533 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TERMINAL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-5373C |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| AEVB | MOUNTING HOLE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE --E AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -SI-30 |
Supersedes
This item replaces cancelled NIIN 002961021. An older drawing citing one of those numbers resolves here.