NSN 5920-00-686-2587 · NIIN 006862587 · FSC 5920
NO DASHES 5920006862587
In Stock
FUSEHOLDER,BLOCK
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.594 |
| MATT | MATERIAL | CONTACT COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE --E AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -SI-30 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.344 AND INCHES MAXIMUM 3.406 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.210 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| MATT | MATERIAL | BODY PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.016 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ACYB | BASE THICKNESS | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.312 |
| AEVB | MOUNTING HOLE STYLE | |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 0.391 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 60.0 |
| CSDX | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | POLE, MAINLINE, FUSED 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-C-533 |
| AAQL | BODY STYLE | |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| SFTT | SURFACE TREATMENT | TERMINAL CADMIUM AND CADMIUM AND CHROMATE AND CADMIUM AND PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TERMINAL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-5373C |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 4 |