NSN 5935-00-841-2887 · NIIN 008412887 · FSC 5935
NO DASHES 5935008412887
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.073 AND INCHES MAXIMUM 1.083 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.120 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND PRESSURE PROOF AND SALT WATER RESISTANT |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.375 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.781 |
| CXCG | INCLUDED CONTACT QUANTITY | 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.328 AND INCHES MAXIMUM 1.390 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.328 AND INCHES MAXIMUM 1.390 |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES NOMINAL 0.391 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS REMOVABLE |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.385 AND INCHES 0.397 |
| CMLP | THREAD QUANTITY PER INCH | 6 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 900.0 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AAJD | THREAD CLASS | 2B |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 10.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1250.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 500.0 |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END MIL SPEC SINGLE MATERIAL RESPONSE -IL--17091 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| CXCG | INCLUDED CONTACT QUANTITY | 7 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.010 AND SILVER GRAINS, TROY 0.010 |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD AND SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC POLYAMIDE NYLON |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.073 AND INCHES MAXIMUM 1.083 |
| AFRT | SHELL TYPE | SOLID |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-25955 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S24234 |
Supersedes
This item replaces cancelled NIINs 005814625 · 009880300. An older drawing citing one of those numbers resolves here.