NSN 5935-00-763-9831 · NIIN 007639831 · FSC 5935
NO DASHES 5935007639831
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQW | MATING END QUANTITY | 1 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 2,CLASS 2 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.130 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S24264 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.421 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.130 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.221 |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.708 AND INCHES MAXIMUM 0.728 |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC |
| ADZC | ENVIRONMENTAL PROTECTION | THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT AND CORROSION RESISTANT |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.803 |
| AAJD | THREAD CLASS | 2A |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.901 AND INCHES MAXIMUM 0.911 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26500 |
| CRJP | CRIMPING TOOL IDENTIFYING NUMBER | 96906-MS24256A |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| CSWM | SHELL SURFACE TREATMENT | ANODIZE |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| CXCG | INCLUDED CONTACT QUANTITY | 15 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.015 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.901 AND INCHES MAXIMUM 0.911 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-367,T6 |
| AAQL | BODY STYLE | |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRT | SHELL TYPE | SOLID |
Supersedes
This item replaces cancelled NIIN 004661290. An older drawing citing one of those numbers resolves here.