NSN 4720-00-554-9367 · NIIN 005549367 · FSC 4720
NO DASHES 4720005549367
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 200.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.000 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE ANODIZE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED COTTON CORD |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S28759 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; NIPPLE-ADDITIONAL MATERIAL STEEL,NIPPLE-ADDITIONAL SURFACE TREATMENT CADMIUM QQ-P-416 TYPE 1 CLASS 2 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| AAJD | THREAD CLASS | 3B |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE ALUMINUM ALLOY |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.212 AND INCHES MAXIMUM 0.244 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 14.500 |
Supersedes
This item replaces cancelled NIIN 002898059. An older drawing citing one of those numbers resolves here.