NSN 4720-00-554-8080 · NIIN 005548080 · FSC 4720
NO DASHES 4720005548080
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.890 |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER RUBBER IMPREGNATED COTTON FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S28759 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 160.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.750 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED COTTON FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER BRAIDED STEEL WIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.462 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 21.500 |
Supersedes
This item replaces cancelled NIIN 002128263. An older drawing citing one of those numbers resolves here.