NSN 5305-00-018-6475 · NIIN 000186475 · FSC 5305
NO DASHES 5305000186475
In Stock
SCREW,MACHINE
Screws
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-W-409 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-631 OR FED SPEC 4TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 5TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 6TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 7TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 8TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 9TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 10TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 11TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 12TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 13TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 14TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 15TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 16TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 17TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 18TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 19TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 20TH MATERIAL RESPONSE QQ-S-634 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.500 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 1.267 AND INCHES MAXIMUM 1.375 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
Supersedes
This item replaces cancelled NIIN 002759836. An older drawing citing one of those numbers resolves here.