NSN 5305-00-272-5343 · NIIN 002725343 · FSC 5305
NO DASHES 5305002725343
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.385 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.081 |
| CYAU | SCREW MATERIAL | STEEL |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.169 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-634 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-637 OR FED STD SINGLE MATERIAL RESPONSE 66 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 2S |
Supersedes
This item replaces cancelled NIIN 005792205. An older drawing citing one of those numbers resolves here.