NSN 5305-00-282-4045 · NIIN 002824045 · FSC 5305
NO DASHES 5305002824045
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| ASXK | HOLE QUANTITY | 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.152 AND INCHES MAXIMUM 0.188 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.188 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.140 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.062 |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.031 |
| AAJD | THREAD CLASS | 2A |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-631 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
Supersedes
This item replaces cancelled NIIN 002718365. An older drawing citing one of those numbers resolves here.