NSN 5305-00-894-4235 · NIIN 008944235 · FSC 5305
NO DASHES 5305008944235
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 1.727 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.937 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.156 AND INCHES MAXIMUM 4.250 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| AAJD | THREAD CLASS | 2A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |