NSN 5305-00-543-2051 · NIIN 005432051 · FSC 5305
NO DASHES 5305005432051
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 140000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| MATT | MATERIAL | OVERALL STEEL COMP 2340 OR STEEL COMP 3135 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4340 OR STEEL COMP 8630 OR STEEL COMP 8740 OR STEEL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.312 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-624 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-624 OR FED SPEC 4TH MATERIAL RESPONSE QQ-S-624 OR FED SPEC 5TH MATERIAL RESPONSE QQ-S-624 OR FED SPEC 6TH MATERIAL RESPONSE QQ-S-624 OR FED SPEC 7TH MATERIAL RESPONSE QQ-S-624 OR FED SPEC 8TH MATERIAL RESPONSE QQ-S-624,FS9440 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.785 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.158 |
Supersedes
This item replaces cancelled NIIN 005341435. An older drawing citing one of those numbers resolves here.