SCREW,CAP,HEXAGON HEAD
Screws
Application: GENERATOR, 30KW, DIESEL, MILITARY STANDARD FAMILY; SUPPORT EQUIPMENT, B-52 AIRCRAFT; SUPPORT EQUIPMENT, H-3 HELICOPTER; TRUCK, FIRE/CRASH P2; GENERATOR, 15KW, DIESEL, MILITARY STANDARD FAMILY; HELICOPTER, MH-53E; CHILLED WATER A/C SYSTEMS; HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, HX UNIQUE; CLOSE IN WEAPON SYSTEM (CIWS-PHALANX)
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 5 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD ALL MATERIAL RESPONSES SAE J429 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.875 AND INCHES MAXIMUM 1.062 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.211 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.489 AND INCHES MAXIMUM 0.500 |
| AGAV | END ITEM IDENTIFICATION | GENERATOR, 30KW, DIESEL, MILITARY STANDARD FAMILY; SUPPORT EQUIPMENT, B-52 AIRCRAFT; SUPPORT EQUIPMENT, H-3 HELICOPTER; TRUCK, FIRE/CRASH P2; GENERATOR, 15KW, DIESEL, MILITARY STANDARD FAMILY; HELICOPTER, MH-53E; CHILLED WATER A/C SYSTEMS; HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, HX UNIQUE; CLOSE IN WEAPON SYSTEM (CIWS-PHALANX) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.438 AND INCHES MAXIMUM 1.500 |
Supersedes
This item replaces cancelled NIINs 000100016 · 000123789 · 000216781 · 000690396 · 002075700 · 002075652 · 002450330 · 002666324 · 005919293 · 005872669 · 007260882 · 007951484. An older drawing citing one of those numbers resolves here.