NSN 6680-00-124-8964 · NIIN 001248964 · FSC 6680
NO DASHES 6680001248964
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Application: LANCE M667/CHAPARRAL M730A1/M730A2 CARRIER GME
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AGAV | END ITEM IDENTIFICATION | LANCE M667/CHAPARRAL M730A1/M730A2 CARRIER GME |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 121.156 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 120.000 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.188 |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 121.156 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| AAJD | THREAD CLASS | 2B |
Supersedes
This item replaces cancelled NIIN 006283596. An older drawing citing one of those numbers resolves here.