NSN 5305-00-455-2489 · NIIN 004552489 · FSC 5305
NO DASHES 5305004552489
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.172 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.382 AND INCHES MAXIMUM 0.449 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 2A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.500 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CL 4 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY FINISH |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |