NSN 5306-00-143-1541 · NIIN 001431541 · FSC 5306
NO DASHES 5306001431541
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 248.0 AND BRINELL STANDARD MAXIMUM 341.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.296 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.375 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.300 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.070 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.099 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5731 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 001827303. An older drawing citing one of those numbers resolves here.