NSN 5340-00-107-9207 · NIIN 001079207 · FSC 5340
NO DASHES 5340001079207
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AJFQ | SECOND LEG END RADIUS | INCHES NOMINAL 0.500 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| STYL | STYLE DESIGNATOR | |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.500 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 0.500 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.757 AND INCHES MAXIMUM 0.767 |
| AKBU | SECOND LEG STYLE | |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.633 AND INCHES MAXIMUM 0.643 |
| AJFP | FIRST LEG END RADIUS | INCHES NOMINAL 0.500 |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MATT | MATERIAL | STEEL COMP 321 |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |