NSN 3020-01-255-1427 · NIIN 012551427 · FSC 3020
NO DASHES 3020012551427
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.3330 |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SKEW TEETH |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.350 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.341 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 45.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.120 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.120 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| FEAT | SPECIAL FEATURES | ONE SUB-DRILL POINT AT APPROXIMATELY 90 DEG FROM SET SCREW HOLE |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |