NSN 3020-00-391-0927 · NIIN 003910927 · FSC 3020
NO DASHES 3020003910927
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 10.8000 |
| AJLA | TEETH QUANTITY | 54 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.688 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 10.0 AND ROCKWELL C MAXIMUM 20.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 11.084 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 4.125 |
| CWPZ | HELIX ANGLE | DEGREES 27.3217 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.0000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | BOTH ENDS INCHES 1.375 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 2.997 |
| CWWS | FIRST STEP NOMINAL LENGTH | BOTH ENDS INCHES 0.063 |
| FEAT | SPECIAL FEATURES | TWO COUNTERWEIGHTS,BOLTS,NUTS,OIL HOLES IN HUB,FIG 1 STAMPED BETWEEN TEETH ON SIDE OF GEAR 170 DEG 57 MIN CCW FROM UPPER CENTER LINE,FIG 4 STAMPED BETWEEN TEETH ON SIDE @OF GEAR 73 DEG @20 MIN CCW FROM FIG 1 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,CLASS B |
| STYL | STYLE DESIGNATOR | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE |