NSN 5305-00-180-0023 · NIIN 001800023 · FSC 5305
NO DASHES 5305001800023
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.348 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 430 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 302 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 CLASS 4 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-7720 CO- F- OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-7720 CO- F- OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-7720 CO- G |
| CYBA | SCREW SURFACE TREATMENT | ANODIZE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 2S |
Supersedes
This item replaces cancelled NIIN 005501229. An older drawing citing one of those numbers resolves here.