NSN 5305-01-120-9904 · NIIN 011209904 · FSC 5305
NO DASHES 5305011209904
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.626 AND INCHES MAXIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.688 AND INCHES MAXIMUM 1.750 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.221 AND INCHES MAXIMUM 0.226 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.074 AND INCHES MAXIMUM 0.086 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.034 AND INCHES MAXIMUM 0.042 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| ASXK | HOLE QUANTITY | 2 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CYAU | SCREW MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1101 |