NSN 5306-00-150-3575 · NIIN 001503575 · FSC 5306
NO DASHES 5306001503575
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.983 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.693 AND INCHES MAXIMUM 3.723 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.640 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.801 AND INCHES MAXIMUM 1.815 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 1.2475 AND INCHES MAXIMUM 1.2490 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.740 AND INCHES MAXIMUM 2.760 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.513 AND INCHES MAXIMUM 3.563 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |