NSN 5305-00-450-5988 · NIIN 004505988 · FSC 5305
NO DASHES 5305004505988
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.438 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.162 AND INCHES MAXIMUM 0.183 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.400 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.860 AND INCHES MAXIMUM 1.890 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 248.0 AND BRINELL STANDARD MAXIMUM 341.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 |