NSN 5305-00-424-6830 · NIIN 004246830 · FSC 5305
NO DASHES 5305004246830
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R54520 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1135 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.615 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.218 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.985 AND INCHES MAXIMUM 1.015 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.400 |