NSN 5305-00-435-9101 · NIIN 004359101 · FSC 5305
NO DASHES 5305004359101
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1189 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.046 AND INCHES MAXIMUM 1.170 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| AAUM | LOCKING FEATURE | THREADS STRIP |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.322 AND INCHES MAXIMUM 0.385 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.250 |
Supersedes
This item replaces cancelled NIIN 011163088. An older drawing citing one of those numbers resolves here.