NSN 5305-00-070-1895 · NIIN 000701895 · FSC 5305
NO DASHES 5305000701895
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.337 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1625 AND INCHES MAXIMUM 0.1635 |
| ABQZ | INTERNAL DRIVE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.276 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.199 AND INCHES MAXIMUM 1.229 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TYE 2 CLASS 3 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |