NSN 5305-00-816-1716 · NIIN 008161716 · FSC 5305
NO DASHES 5305008161716
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASK | HEAD STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.478 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.063 AND INCHES MAXIMUM 2.093 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.832 AND INCHES MAXIMUM 0.890 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABQZ | INTERNAL DRIVE STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1207 |