NSN 5305-00-526-2347 · NIIN 005262347 · FSC 5305
NO DASHES 5305005262347
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNRC |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| MATT | MATERIAL | OVERALL STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.623 AND INCHES MAXIMUM 0.766 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.312 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CL 1 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 150000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| AASK | HEAD STYLE | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1352 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.457 AND INCHES MAXIMUM 0.469 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.253 |
Supersedes
This item replaces cancelled NIIN 008655758. An older drawing citing one of those numbers resolves here.