NSN 5340-01-301-5238 · NIIN 013015238 · FSC 5340
NO DASHES 5340013015238
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.271 AND INCHES MAXIMUM 0.291 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.133 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.045 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.360 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.471 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| MATT | MATERIAL | OVERALL PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE L--410 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1397 |
Supersedes
This item replaces cancelled NIIN 014350519. An older drawing citing one of those numbers resolves here.