NSN 5310-00-815-6183 · NIIN 008156183 · FSC 5310
NO DASHES 5310008156183
In Stock
NUT SPACER,PLATE
Nuts and Washers
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.341 AND INCHES MAXIMUM 0.347 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-A-250 TO 3,T6 OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-250 TO 5,T3 OR T4 OR FED SPEC 3RD MATERIAL RESPONSE QQ-A-250 TO 13,T6 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MINIMUM 1.049 AND INCHES MAXIMUM 1.079 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.102 AND INCHES MAXIMUM 0.108 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.421 |
| ADFR | MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| ADAZ | THRU-HOLE DIAMETER | INCHES MINIMUM 0.260 AND INCHES MAXIMUM 0.270 |
| ADEB | PLATE THICKNESS | INCHES MINIMUM 0.086 AND INCHES MAXIMUM 0.094 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |