NSN 5305-01-530-2410 · NIIN 015302410 · FSC 5305
NO DASHES 5305015302410
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A286 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 3180 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S-QQ--35 OR FED SPEC SINGLE TREATMENT RESPONSE A-S-QQ--416, TYE 2, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.276 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.511 AND INCHES MAXIMUM 0.541 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.155 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE OR CADMIUM |