NSN 6105-00-241-0005 · NIIN 002410005 · FSC 6105
NO DASHES 6105002410005
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJU | OVERALL LENGTH | INCHES 12.062 |
| AAJV | OVERALL WIDTH | INCHES 6.312 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.5937 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.1250 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 0.4095 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 1.8750 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.1250 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.0625 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.425 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.5000 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.1250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | WATERTIGHT |
| ANTN | SPECIFIC USE | FAN MOTOR |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BTBY | SHAFT END STYLE | |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1250 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.562 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 AND AMBIENT CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1800.0 AND SINGLE FULL LOAD 1725.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A12 AND FOURTH STYLE A13 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---1940 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |