NSN 3110-00-954-3739 · NIIN 009543739 · FSC 3110
NO DASHES 3110009543739
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1406 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.1250 |
| AGYE | SURFACE FINISH | GROUND |
| AGVT | OUTER RING WIDTH | MILLIMETERS NOMINAL 18.00 |
| AGVU | INNER RING WIDTH | MILLIMETERS NOMINAL 22.00 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES NOMINAL 0.3750 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.3750 |
| FEAT | SPECIAL FEATURES | PEAK STARTING TORQUE 1700 MG7MM MAX UNDER A 75 GM THRUST LOAD; MAX SMOOTH-RATOR READING DWELL 3 COUNT ZERO |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE DC.510-50,FSC- 71984 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0310 |
| AGZD | BORE SHAPE | STRAIGHT |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.4220 |
| STYL | STYLE DESIGNATOR | |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0004 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| AGZC | LOAD DIRECTION | RADIAL |