NSN 3020-00-933-0624 · NIIN 009330624 · FSC 3020
NO DASHES 3020009330624
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.343 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.041 |
| CWNH | TOOTH FORM | STANDARD |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| BDZQ | BACKLASH DESIGNATION | GRADE C |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 75.0 AND ROCKWELL B MAXIMUM 83.0 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.9990 AND INCHES MAXIMUM 1.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI 303 TO SAE 30303 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
Supersedes
This item replaces cancelled NIIN 008134605. An older drawing citing one of those numbers resolves here.