NSN 5305-00-148-6344 · NIIN 001486344 · FSC 5305
NO DASHES 5305001486344
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.438 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.562 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.188 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.312 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CYAU | SCREW MATERIAL | STEEL COMP 1020 OR STEEL COMP 1018 OR STEEL COMP 1117 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE SAE OR FED STD 2ND MATERIAL RESPONSE 66 OR ASSN STD 2ND MATERIAL RESPONSE AISI TO SAE OR ASSN STD 3RD MATERIAL RESPONSE A-S 5022 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 63.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |