NSN 5306-00-466-0740 · NIIN 004660740 · FSC 5306
NO DASHES 5306004660740
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: AIRCRAFT C-5, C-141, S-3B
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT C-5, C-141, S-3B |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.187 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.382 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.335 AND INCHES MAXIMUM 1.382 |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF ALL TREATMENT RESPONSES STSBS000,FSC- 98897 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 132000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CHROMATE |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE H-11,STS BS000,FSC- 98897 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
Supersedes
This item replaces cancelled NIIN 013198483. An older drawing citing one of those numbers resolves here.