NSN 5306-01-477-5582 · NIIN 014775582 · FSC 5306
NO DASHES 5306014775582
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F18 E/F
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.467 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.358 AND INCHES MAXIMUM 1.373 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.187 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.075 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.511 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.605 |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.313 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,CLOSE TOLERANCE, SPLINE DRIVE,CRES (125 KSI FSU) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |