NSN 5306-01-349-9534 · NIIN 013499534 · FSC 5306
NO DASHES 5306013499534
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.480 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.840 AND INCHES MAXIMUM 1.870 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.358 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.521 AND INCHES MAXIMUM 0.531 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.092 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |